|
|
Leo | Overview of the N64® Disk Drive Functions |
LeoByteToLBA | Converts from byte to LBA |
LeoCACreateLeoManager | Creates and starts the Leo Manager device driver system threads for America-based Game Paks that also use disks in the N64® Disk Drive. |
LeoCJCreateLeoManager | Creates and starts the Leo Manager device driver system threads for Japan-based Game Paks that also use disks in the N64® Disk Drive. |
LeoClearQueue | Clears the Leo Manager�s command queue |
LeoCreateLeoManager | Creates and starts the Leo Manager device driver system threads for games that run exclusively from disks in the N64® Disk Drive; that is, they are not used in combination with a Game Pak. |
LeoGetAAdr | Gets the storage offset address (offset from the beginning of DDROM) for a specified ASCII character by linking to all of the tables related to ASCII characters |
LeoGetAAdr2 | Gets the storage offset address (offset from the beginning of DDROM) for a specified ASCII character from the 32 bits of data compressed by the asccode tool |
LeoGetKAdr | Gets the storage offset address (offset from the beginning of DDROM) for a specified Kanji character. |
LeoInquiry | Inquires as to the version numbers of hardware and software for the N64® Disk Drive |
LeoLBAToByte | Converts from LBA to byte |
LeoModeSelect | Has been modified into an asynchronous function and renamed to LeoModeSelectAsync |
LeoModeSelectAsync | Alters the N64® Disk Drive mode switching time; that is it provides a way to alter the wait-time specified for changes between active, standby, and sleep modes to meet the needs of the game. |
LeoReadCapacity | Calculates the N64® Disk Drive disk available region |
LeoReadDiskID | Acquires the ID number written in the system region of the N64® Disk Drive disk. |
LeoReadRTC | Reads the built-in real-time clock |
LeoSetRTC | Sets the built-in real-time clock |
LeoReadWrite | Reads and writes between RDRAM and the N64® Disk Drive |
leoReset | Has been renamed to LeoReset
|
LeoReset | Inhibits the issuing of new commands, clears the command queue, and resets the N64® Disk Drive |
LeoResetClear | Cancels the N64® Disk Drive reset state |
LeoRezero | Recalibrates the drive by initializing several set values in the internal resistor and moving the head to LBA0 |
LeoSeek | Moves the head of N64® Disk Drive to a specified position |
LeoSpdlMotor | Controls the motor and the head position in the drive |
LeoTestUnitReady | Examines whether or not the disk is inserted, the head is retracted, and the motor is on |